{"id":2396,"date":"2023-09-11T13:24:48","date_gmt":"2023-09-11T11:24:48","guid":{"rendered":"https:\/\/cncgraf.com\/?page_id=2396"},"modified":"2025-02-14T09:34:16","modified_gmt":"2025-02-14T08:34:16","slug":"documentation","status":"publish","type":"page","link":"https:\/\/cncgraf.com\/en\/dokumentationen\/","title":{"rendered":"Documentations"},"content":{"rendered":"
\n
<\/div>\n\n\n\n

PDF documentation<\/h1>\n\n\n\n
<\/div>\n\n\n\n
\n<\/div>\n\n\n\n
\n
CNC Controller SMC5D-m4 pro\/lan<\/summary>\n
\n

CNC Controller SMC5D-m4 pro\/lan<\/h2>\n\n\n\n

Documentation, pin assignments for inputs and outputs and other technical descriptions of the controller.<\/p>\n\n\n\n

\n
\"\" Documentation smc5d-m4 pro<\/strong><\/a><\/div>\n\n\n\n
\"\" Pin assignment of the <\/strong>smc5d-m4 lan<\/strong> board<\/strong><\/a><\/div>\n\n\n\n
\"\" Connection of NR-8 power supply unit and relay card (24V variant) to smc5d-m4 pro <\/a><\/div>\n<\/div>\n\n\n\n
<\/div>\n<\/div>\n<\/details>\n\n\n\n
CNC Controller SMC5D-p32<\/summary>\n
\n

CNC Controller SMC5D-p32 <\/h2>\n\n\n\n

Documentation, pin assignments, connection of 24V open collector, connection of inductive switches and other technical descriptions of the controller.<\/p>\n\n\n\n

\n
\"\" Pin assignment of the smc5d-p32 board<\/strong><\/strong><\/a><\/div>\n\n\n\n
\"\" Pin assignment of the aluminium box (D-SUB 25 connection)<\/strong><\/a><\/div>\n\n\n\n
\"\" Dimensions<\/strong> of the smc5d-p32 board<\/strong><\/strong><\/a><\/div>\n\n\n\n
\"\" Connecting the external power supply<\/strong><\/a><\/div>\n\n\n\n
\"\" 24V Connection of outputs CON3\/CON4 as open collector (PNP)<\/strong><\/a><\/div>\n\n\n\n
\"\" Connection of the inductive switches to CON3\/4 (PNP)<\/strong><\/a><\/div>\n\n\n\n
\"\" Connection of outputs CON2\/3\/4<\/strong><\/a><\/div>\n\n\n\n
\"\" Changing the outputs on CON2 to Open Collector<\/strong><\/a><\/div>\n<\/div>\n\n\n\n
<\/div>\n<\/div>\n<\/details>\n\n\n\n
CNC Controller SMC4D-ul\/u2<\/summary>\n
\n

CNC Controller SMC4D-ul\/u2<\/h2>\n\n\n\n

Pin assignment of the controller in both the box and circuit board versions.<\/p>\n\n\n\n

\n
\"\"Pin assignment of the aluminium box (D-SUB 25 connection)<\/strong><\/a><\/div>\n\n\n\n
\"\" Pin assignment of the smc4d-ul\/u2 board<\/strong><\/a><\/div>\n<\/div>\n<\/div>\n\n\n\n
<\/div>\n<\/details>\n\n\n\n
Interface card DAC-INT-10V<\/summary>\n
\n

Interface card DAC-INT-10V<\/h2>\n\n\n\n

Technical documentation for the DAC-INT-10V interface card.<\/p>\n\n\n\n

\n
\"\" Interface card DAC-INT-10V<\/strong><\/a><\/div>\n<\/div>\n\n\n\n
<\/div>\n<\/div>\n<\/details>\n\n\n\n
Connection of 3D probe and tool length sensor<\/summary>\n
\n

Connection of 3D probe and tool length sensor<\/h2>\n\n\n\n

Types of connection of the 3D probe and tool length sensor, directly to the controller or using the DAC-INT-10V interface card or IN-OUT connection board.<\/p>\n\n\n\n

\n
\"\" Tool length sensor connection<\/strong><\/a><\/div>\n\n\n\n
\"\" Connection 3D push-button to DAC-INT-10V interface card<\/strong><\/a><\/div>\n\n\n\n
\"\" Connection 3D button to smc5d controller<\/strong><\/a><\/div>\n\n\n\n
\"\" Connection to IN-OUT connection board for smc5d controller (version 1)<\/strong><\/a><\/div>\n\n\n\n
\"\" Connection to IN-OUT connection board for smc5d controller (version 2)<\/strong><\/a><\/div>\n<\/div>\n\n\n\n
<\/div>\n<\/div>\n<\/details>\n\n\n\n
Relay cards NE6A and NR8<\/summary>\n
\n

Relay cards NE6A and NR8<\/h2>\n\n\n\n

Technical documentation of the NE6A and NR8 relay cards and the pin assignment of the DAC-INT-10V interface card.<\/p>\n\n\n\n

\n
\"\" NE6A power supply unit and relay card<\/strong><\/a><\/div>\n\n\n\n
\"\" NE6A Ventilator (fan)<\/strong><\/a><\/div>\n\n\n\n
\"\" NR8 power supply unit and relay card<\/strong><\/a><\/div>\n<\/div>\n\n\n\n
<\/div>\n<\/div>\n<\/details>\n\n\n\n
Connection of stepper motors, switches & buttons<\/summary>\n
\n

Connection of stepper motors, switches & buttons<\/h2>\n\n\n\n

Pin assignment of the 9-pin D-SUB connector for 2-phase stepper motors and connection of reference switches and buttons\/length sensors.<\/p>\n\n\n\n

\n
\"\" Connecting the stepper motors and switches<\/strong><\/a><\/div>\n\n\n\n
\"\" Connection of area sensor \/ tool length sensor \/ 3D sensor<\/strong><\/a><\/div>\n\n\n\n
\"\"IN-OUT connection board for SMC5d: Connection 1 <\/a><\/div>\n\n\n\n
\"\"IN-OUT connection board for SMC5d: Connection 2<\/a><\/div>\n<\/div>\n<\/div>\n<\/details>\n\n\n\n
Circuit diagrams and assembly drawings<\/summary>\n
\n

Circuit diagrams and assembly drawings<\/h2>\n\n\n\n

Detailed wiring diagrams for CNC control electronics - NR8 transformer\/switching power supply and NE6A transformer as well as installation illustrations.<\/p>\n\n\n\n

\n
\"\" NR8 Circuit diagram for CNC control electronics, transformer version<\/strong><\/a><\/div>\n\n\n\n
\"\" NR8 circuit diagram for CNC control electronics, switched-mode power supply version<\/strong><\/a><\/div>\n\n\n\n
\"\" Circuit diagram for CNC control electronics (NE6A), suitable for transformer only<\/strong><\/a><\/div>\n<\/div>\n\n\n\n

Assembly diagrams of the control electronics<\/h3>\n\n\n\n
\n
\"\"<\/figure>\n\n\n\n
\"\"
SONY DSC<\/figcaption><\/figure>\n\n\n\n
\"\"
SONY DSC<\/figcaption><\/figure>\n\n\n\n
\"\"
SONY DSC<\/figcaption><\/figure>\n\n\n\n
\"\"
SONY DSC<\/figcaption><\/figure>\n\n\n\n
\"\"
SONY DSC<\/figcaption><\/figure>\n\n\n\n
\"\"
SONY DSC<\/figcaption><\/figure>\n<\/figure>\n<\/div>\n<\/details>\n\n\n\n
Handwheel connection and special functions<\/summary>\n
\n

Connection of handwheel<\/h2>\n\n\n\n

Technical data and descriptions for connecting the electronic handwheel and the NA2 connection board for handwheel and industrial joystick.<\/p>\n\n\n\n

\n
\"\" Connection via NA2 board<\/strong><\/a><\/div>\n\n\n\n
\"\" Connection note<\/strong><\/a><\/div>\n<\/div>\n\n\n\n

Freely programmable function buttons F1-F12. The keys can be labelled.<\/p>\n\n\n\n

\n
\n
\"\"<\/figure>\n<\/div>\n\n\n\n
\n
\"\"<\/figure>\n<\/div>\n<\/div>\n<\/div>\n<\/details>\n\n\n\n
Special functions of the handwheel (requires firmware 0.26)<\/summary>\n
\n

F2 + F3 (change of direction in Rapid Move mode):<\/strong> Change the direction of travel directly with the rotary wheel without using the +\/- buttons.<\/p>\n\n\n\n

F10 + F11 (change direction of travel for X\/Y):<\/strong> Select an axis (X or Y) and change the direction of travel.<\/p>\n\n\n\n

F6 + F7 (buzzer on\/off):<\/strong> Switch the acoustic signal on or off.<\/p>\n\n\n\n

F3 + F4 (encoder\/potentiometer selection):<\/strong> Use this key combination to select between encoder and potentiometer. The setting depends on the handwheel hardware and should not be changed.<\/p>\n\n\n\n

Note:<\/strong> The buttons must be held down for about 2 seconds to activate or change the functions.<\/p>\n\n\n\n

<\/div>\n<\/div>\n<\/details>\n<\/div>","protected":false},"excerpt":{"rendered":"

PDF documentation<\/p>","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"footnotes":""},"class_list":["post-2396","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/cncgraf.com\/en\/wp-json\/wp\/v2\/pages\/2396","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/cncgraf.com\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/cncgraf.com\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/cncgraf.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/cncgraf.com\/en\/wp-json\/wp\/v2\/comments?post=2396"}],"version-history":[{"count":0,"href":"https:\/\/cncgraf.com\/en\/wp-json\/wp\/v2\/pages\/2396\/revisions"}],"wp:attachment":[{"href":"https:\/\/cncgraf.com\/en\/wp-json\/wp\/v2\/media?parent=2396"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}